Blog

G3-Alliance Release V8: Multi-Utility PLC Certification Extends the Grid-Edge Network Behind Home-to-Grid and Vehicle-to-Grid

Jul 20, 2026 5 minutes to read
g3_hero_v3

G3-Alliance Certification Release V8, published July 3, 2026, extends G3 & G3-Hybrid power-line communication (PLC) certification to battery-powered gas and water meters for the first time. Previously limited to mains-powered electricity meters, G3-PLC certification now covers multi-utility metering on a single network — and, in Semitech’s view, marks a step toward the kind of certified, utility-owned grid-edge communication backbone that Home-to-Grid (H2G) and Vehicle-to-Grid (V2G) programs will increasingly rely on.

This builds on Semitech’s track record in G3-PLC: our SM2400 — a G3-PLC semiconductor built for utility-grade metering — previously earned its own G3-PLC Hybrid certification, covered by ElectronicSpecifier and Enlit World. As a G3-PLC semiconductor and SoC supplier, Semitech designs the SM2400 to meet exactly this kind of expanding certification scope, so utilities and OEMs building on G3-PLC can standardize on one chip across electricity, gas, and water metering.

The release, detailed in G3-Alliance’s Q2 2026 newsletter, closes a long-standing gap: G3-PLC certification had covered electricity meters, which draw constant power from the mains to run a PLC modem, but not battery-powered gas and water meters, which previously needed separate RF or cellular connectivity. Release V8’s new certification profile lets battery-powered devices join the same G3-PLC mesh, enabling true multi-utility AMI on one network.

An Enabling Step for Home-to-Grid and Vehicle-to-Grid

G3-Alliance’s own charter has named electric vehicle charging and in-home energy management as target applications for G3-PLC since the Alliance was founded in 2011, alongside its original metering use case. Release V8 doesn’t change the EV charging protocol itself — ISO 15118 EV-to-charger communication runs on a separate power-line technology, HomePlug GreenPHY, not G3-PLC. What it does is widen the certified device base of the same multi-application grid-edge PLC ecosystem that utilities are building out for metering, home energy management, and — per G3-Alliance’s stated scope — EV charging and grid monitoring.

That matters for H2G and V2G deployments specifically: both depend on a utility having reliable, granular visibility into grid-edge load and generation — the same visibility a fully certified, multi-utility G3-PLC metering network provides. As utilities extend certified PLC coverage to more meters and more devices behind the meter, they build more of the grid-edge data and communication infrastructure that H2G and V2G coordination ultimately needs, even where the EV-charging link itself runs on a different PLC standard. This is Semitech’s strategic read on the announcement — G3-Alliance’s release notes don’t make the H2G/V2G connection explicitly, but the application scope the Alliance has defined since 2011 points in this direction.

Semitech Semiconductor builds G3-PLC-compliant SoCs for exactly this kind of deployment. Our SM2400 is designed to support the low-power, battery-friendly operation Release V8’s certification profile requires, so utilities evaluating multi-utility metering — and the grid-edge data foundation H2G and V2G programs will draw on — don’t have to trade network unification against modem power budget.

For utilities and meter OEMs planning multi-year AMI rollouts, this certification removes one of the last technical reasons to run separate networks for electricity versus gas and water — and adds one more piece to the grid-edge communication layer that distributed-energy coordination will be built on.

Questions About G3-Alliance Release V8

What is G3-Alliance Certification Release V8?
It’s a certification profile published by G3-Alliance in its Q2 2026 newsletter (July 3, 2026) that extends G3-Hybrid PLC certification to battery-powered gas and water meters, which previously could not be certified for G3-PLC networks because the standard assumed mains-powered devices.

Does this mean G3-PLC now powers EV charging communication?
No. EV-to-charger communication under ISO 15118 runs on a different power-line communication technology, HomePlug GreenPHY, not G3-PLC. Release V8 extends metering certification; it does not change or merge the two PLC standards.

Why does Semitech connect this to Home-to-Grid and Vehicle-to-Grid?
G3-Alliance’s own charter has listed electric vehicle charging and in-home energy management as target applications for G3-PLC since 2011, alongside metering. In Semitech’s view, a more complete, certified, multi-device PLC metering network builds toward the same grid-edge communication and visibility infrastructure that H2G and V2G programs depend on — though G3-Alliance has not stated this connection explicitly, and it should be read as Semitech’s strategic interpretation, not confirmed interoperability.

What does Release V8 mean for utilities evaluating AMI rollouts?
It removes one of the last technical barriers to running electricity, gas, and water metering on a single certified PLC network, rather than maintaining separate networks or relying on cellular/RF connectivity for battery-powered gas and water meters.

→ Read the original G3-Alliance Q2 2026 newsletter.

Further reading:

Curious how battery-powered G3-PLC metering fits your AMI or grid-edge roadmap? Contact our team, or see the SM2400 on our products page.

Leave a Reply

Your email address will not be published. Required fields are marked *